Table of Contents
Advertisement
5. Press LULLABY SKIP to skip to Lullaby #4. The system plays Lullaby #4 then
repeats it.
6. Press LULLABY SKIP to skip to Lullaby #1. The system plays Lullaby #1 then
cycles through all lullabies.
Press ▲Vol and ▼Vol on the monitor or camera to adjust the volume. Press ▼Vol
all the way down on the monitor to mute the lullaby playing through the monitor.
USING THE INTERCOM
The Intercom feature lets you talk to whomever is within camera range.
1. Decide which camera you want to establish an intercom link with, and make it the
full screen live view camera.
2. Press and hold TALK the monitor.
3. Speak clearly into the microphone.
4. Release TALK to listen to the response.
CAMERA PAIRING
The system comes with one camera that has already been paired. It will
communicate with the monitor when it is powered on.
The pairing function lets you add up to 3 additional cameras to your system. It also
lets you re-pair your first camera if needed.
# Pair the cameras to the monitor before mounting the cameras.
1. Verify that the monitor is powered on (see page 6).
2. Install and power on the accessory cameras according to the procedures
beginning on page 6.
3. Pair the accessory cameras according to the procedures on page 23.
4. Once the camera has been paired, it will be immediately viewable on the monitor.
MAINTAINING YOUR SYSTEM
MONITOR
As you use your monitor, keep the screen clean by wiping it with a microfiber cloth
to remove fingerprints, dust, etc.
CAMERA
When dust and grime builds up on the camera lens and glass, it affects the
camera's "vision." Use a microfiber cloth to regularly clean the camera(s) or when
night vision video is cloudy or unclear.
25
Advertisement
Table of Contents
