Table of Contents
Advertisement
4. Press
LuLLaBY sKIP
5. Press
LuLLaBY sKIP
6. Press
LuLLaBY sKIP
lullabies.
7. Press
and
▲Vol
down on the monitor to mute the lullaby playing through the monitor.
usING tHe INterCom
The Intercom feature lets you talk to whomever is within camera range.
1. Decide which camera you want to establish an intercom link with, and make it the full screen
live view camera.
2. Press and hold
3. Speak clearly into the microphone.
4. Release
to listen to the response.
taLK
Camera PaIrING
The system comes with one camera that has already been paired. It will communicate with the
monitor when it is powered on.
The pairing function lets you add up to 3 additional cameras to your system. It also lets you re-pair
your first camera if needed.
Pair the cameras to the monitor before mounting the cameras.
1. Verify that the monitor is powered on (see page 10).
2. Install and power on the accessory cameras according to the procedures beginning on page 8.
3. Pair the accessory cameras according to the procedures on page 25.
4. Once the camera has been paired, it will be immediately viewable on the monitor.
to skip to Lullaby #3. The system plays Lullaby #3 then repeats it.
to skip to Lullaby #4. The system plays Lullaby #4 then repeats it.
to skip to Lullaby #1. The system plays Lullaby #1 then cycles through all
on the monitor or camera to adjust the volume. Press
▼Vol
the monitor.
taLK
all the way
▼Vol
29
Advertisement
Table of Contents
