Lullabies; Using The Intercom - Uniden BW31 Series Owner's Manual

LULLABIES

Your system comes with four preprogrammed lullabies. You can control the lullabies
from either the monitor or the camera. However, if you want to control them from the
monitor, the camera you want to play them through must be in full screen mode.
When you press LULLABY PLAY/STOP to turn on the lullaby feature, Lullaby #1
begins playing. It will repeat until you press LULLABY SKIP to move to the next
lullaby.
The Lullaby feature can also play all lullabies one after the other. Press LULLABY
PLAY/STOP to turn on the Lullaby system and begin playing Lullaby #1. Press
LULLABY SKIP four (4) times after Lullaby #1 begins playing. Lullaby #1 restarts
and then cycles through the rest of the lullabies
1. To control the lullabies from the monitor, decide which camera you want to play
lullabies and make it the full screen live view camera.
2. Press LULLABY PLAY/STOP on the monitor or camera. The system plays
Lullaby #1 then repeats it.
3. Press LULLABY SKIP to skip to Lullaby #2. The system plays Lullaby #2 then
repeats it.
4. Press LULLABY SKIP to skip to Lullaby #3. The system plays Lullaby #3 then
repeats it.
5. Press LULLABY SKIP to skip to Lullaby #4. The system plays Lullaby #4 then
repeats it.
6. Press LULLABY SKIP to skip to Lullaby #1. The system plays Lullaby #1 then
cycles through all lullabies.
7. Press ▲Vol and ▼Vol on the monitor or camera to adjust the volume. Press
▼Vol all the way down on the monitor to mute the lullaby playing through the
monitor.

USING THE INTERCOM

The Intercom feature lets you talk to whomever is within camera range.
1. Decide which camera you want to establish an intercom link with, and make it the
full screen live view camera.
2. Press and hold TALK the monitor.
3. Speak clearly into the microphone.
4. Release TALK to listen to the response.
32