Cleaning Your Alarm - Kidde P4010DCSCO-WCA User Manual

tHe FoLLoWinG SyMPtoMS are reLated to carbon Monoxide PoiSoninG and
SHoULd be diScUSSed WitH aLL MeMberS oF tHe HoUSeHoLd:
1. MiLd exPoSUre:
Headaches, fatigue, drowsiness, shortness of breath, "flu"-like symptoms
(without fever), and impaired motor functions (like difficulty walking or problems with balance);
2. MediUM exPoSUre:
Dizziness, nausea and vomiting, chest pain, poor vision, difficulty thinking;
3. extreMe exPoSUre:
Loss of consciousness, convulsions, coma, and death;
The above levels of exposure relate to healthy adults. Levels differ for those at high risk. Exposure to
high levels of carbon monoxide can be fatal or cause permanent damage and disabilities. When flu-like
symptoms with fever are experienced, ensure that the possibility of CO poisoning is not automatically
ruled out. Many cases of reported carbon monoxide poisoning indicate that while victims are aware they
are not well, they become so disoriented they are unable to save themselves by either exiting the building
or calling for assistance. Also, young children and household pets may be the first affected. Familiarization
with the effects of each level is important.

15. Cleaning Your Alarm

yoUr aLarM SHoULd be cLeaned at LeaSt once a year
You can clean the interior of your alarm (sensing chamber) by using compressed air or a vacuum cleaner
hose and blowing or vacuuming through the openings around the perimeter of the alarm. The outside
of the alarm can be wiped with a damp cloth. Use only water to dampen the cloth, use of detergents or
cleaners could damage the alarm.
If the alarm is in Fault mode and the Red LED is blinking a fault code of 10 or 14 flashes (after a Test/Hush
button push), the alarm may be in need of cleaning. After cleaning, press the Test/Hush button. If the fault
does not clear, the alarm needs to be replaced.
27