•
Never use detergent or other solvents to clean the unit.
•
Avoid spraying air freshener, hair spray, or other aerosols near the alarm.
•
Do not paint the unit. Paint will seal the vents and interfere with the sensor's ability to detect smoke
and CO.
•
Never attempt to disassemble the unit or clean inside. This action will void your warranty.
•
The following substances can affect the CO sensor and may cause false readings and damage to the
sensor: Methane, propane, isobutane, iso-propanol, ethyl acetate, hydrogen sulfide, sulfide dioxides,
alcohol based products, paints, thinner, solvents, adhesives, hair spray, after shave, perfume, and
some cleaning agents.
•
Move the Alarm and place in another location prior to performing any of the following:
•
Staining or stripping wood floors or furniture
•
Painting
•
Wall papering
•
Using adhesives
Storing the unit in a plastic bag during any of the above projects will protect the sensors from damage.
When household cleaning supplies or similar contaminates are used, the area must be well ventilated.
WarninG: reinStaLL tHe aLarM aS Soon aS PoSSibLe to enSUre continUoUS
Protection.
28