Kidde P4010DCSCO-WCA User Manual page 10

WarninG: PLeaSe read careFULLy and tHoroUGHLy
•
IMPORTANT: This alarm is designed to detect carbon monoxide gas from ANY source of combustion.
It is NOT designed to detect any other gas.
caUtion:
This alarm will only indicate the presence of carbon monoxide gas at the sensor. Carbon
monoxide gas may be present in other areas. Never restart the source of a CO problem until it has been
fixed. NEVER IGNORE THE ALARM!
•
Industry experts recommend a CO alarm be installed on each level of the home—ideally on any level
with fuel burning appliances and outside of sleeping areas.
•
If only one CO alarm is installed, confirm it can be heard from all sleeping areas.
WarninG: tHiS ProdUct iS intended For USe in ordinary indoor LocationS oF
FaMiLy LiVinG UnitS. it iS not deSiGned to MeaSUre coMPLiance WitH coMMerciaL or
indUStriaL StandardS. it iS not SUitabLe For inStaLLation in HazardoUS LocationS
aS deFined in tHe LocaL bUiLdinG code. it iS not deSiGned For USe in a recreationaL
VeHicLe (rV) or boat.
•
The installation of this device should not be used as a substitute for proper installation, use, and
maintenance of fuel burning appliances, including appropriate ventilation and exhaust systems.
•
This alarm does not prevent CO from occurring, nor can it solve any existing CO problem.
WarninG: tHiS deVice iS deSiGned to Protect indiVidUaLS FroM acUte eFFectS oF
carbon Monoxide exPoSUre. it May not FULLy SaFeGUard indiVidUaLS WitH SPeciFic
MedicaL conditionS. iF in doUbt, conSULt a MedicaL Practitioner. indiVidUaLS WitH
MedicaL ProbLeMS May conSider USinG WarninG deViceS WHicH ProVide aUdibLe and
ViSUaL SiGnaLS For carbon Monoxide concentrationS Under 30 PPM.
•
This alarm has not been investigated for carbon monoxide detection below 70 PPM.
•
This combination smoke and carbon monoxide alarm requires a continuous supply of electrical
power – it will not work without power.
10