Battery - Kidde P4010DCSCO-WCA User Manual

Photoelectric smoke & carbon monoxide alarm with voice and wireless interconnect
Table of Contents

Advertisement

note:
Hush
and Locate features are dependent on the type of models in your interconnect system.
®
Non-wireless models cannot receive the wireless Locate feature and will continue to alarm until the
initiating unit is Hushed or the Smoke/ CO condition clears.
WarninG: aLtHoUGH reSet and Locate FeatUre can be USed For co aLarM
eVentS, it iS iMPoSSibLe to deterMine tHe SoUrce oF a co aLarM USinG SiGHt or
SMeLL. aLWayS conSider a co aLarM eVent aS danGeroUS.

12. Battery

note:
This alarm is powered by a non-replaceable, sealed lithium battery backup system. No battery
installation or replacement is necessary for the life of the alarm.
iMPortant:
Constant exposure to high or low humidity or temperatures may reduce battery life.
WarninG: no SerViceabLe PartS incLUded. do not atteMPt to oPen tHe aLarM
For any reaSon! do not try to rePair tHe aLarM yoUrSeLF.
LoW battery
This alarm is equipped with a low battery monitor circuit. If the battery capacity can no longer provide
adequate power for all alarm functions, the low battery condition will occur. See Troubleshooting Guide.
The unit must be replaced within 7 days of the first occurrence of the "Low Battery Warning" to provide
continuous alarm protection.
23

Advertisement

Table of Contents
loading

Table of Contents