Surface Maintenance - Zephyr Essentials Breeze I AK1100 Series Use, Care And Installation Manual

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,
or steel wool/scouring pads which will scratch and damage surface. Do not use products containing chlorine
bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless
luster and grain. Always scrub lightly using a micro fi ber or clean cotton cloth and with grain.
Metal MeshFilters
The metal mesh filters are intended to trap residue and grease from cooking. Although the fi lters should never
need replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.
Filters may be placed in dishwasher at low heat or soaked in hot soapy water. Dry fi lters and re-install before
using hood.
Removing Metal Mesh Filters (Fig 2)
1. Push in on fi lter handles.
2. Pivot front of fi lter downward.
3. Remove fi lter by pulling away from hood.
Replacing Metal Mesh Filters
Hood Model: Part No.
AK1124x 50200013
AK1100x/AK1136x 50200012
AK1200x/AK1236x 50200012
Qty. to Order.
2
2
2
Fig 2
15