Table of Contents
Advertisement
Available languages
Available languages
www.zephyronline.com
SURFACE MAINTENANCE:
Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive
or abrasive detergent or steel wool/scouring pads which will scratch and damage surface.
For heavier soil use liquid degreaser.
After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish
and buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the
grain.
Do not use any product containing chlorine bleach. Do not use "orange" cleaners.
They need not be replaced on a regular basis but are required to be kept clean.
Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to
1. Push in on spring loaded handle
12
Advertisement
Table of Contents
Need help?
Do you have a question about the Siena Pro Island and is the answer not in the manual?
Questions and answers