Clock Functions - Electrolux OEE5C71X User Manual

10 www.electrolux.com
The lamp may turn off
automatically at a
temperature below 60 °C
during some oven functions.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
7.2 Setting the time. Changing
the time
You must set the time before you
operate the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
again and again until
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Press
starts to flash.
3. Press
time.
The display shows
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MIND‐
ER
or to set the correct
starts to flash.
again and again until
or to set the DURATION
.
Application
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on
the operation of the appliance. You can set the MINUTE
MINDER at any time, also when the appliance is off.
4. When the time ends,
5. Press any button to stop the acoustic
6. Turn the knob for the oven functions
7.4 Setting the END
1. Set an oven function and
2. Press
3. Press
The display shows
4. When the time ends,
5. Press any button to stop the signal.
6. Turn the knob for the oven functions
7.5 Setting the TIME DELAY
1. Set an oven function and
an acoustic signal sounds. The
appliance deactivates automatically.
signal.
and the knob for the temperature to
the off position.
temperature.
again and again until
starts to flash.
or to set the time.
.
an acoustic signal sounds. The
appliance deactivates automatically.
and the knob for the temperature to
the off position.
temperature.
flashes and
flashes and