Brinkmann 810-2455-G Owner's Manual page 22

Choose a good, cleared assembly
area and get a friend to help you
put your grill together . Lay
card board down to protect grill
finish and assembly area .
CAUTION: Some parts may contain
sharp edges . Wear
protective gloves if
necessary .
Step 1
Attach cart base to side panels .
Insert four M6 X 10 mm bolts
through cart base and into legs
and tighten securely . Be sure the
door hinge holes face forward .
Step 2
Attach back panel to left and right
leg of cart assembly using six
M6 X 10 mm bolts .
Step 3
Attach the tank block bar to the
bottom cart base and the back
panel using two M6 X 10 mm
bolts .
21
Door Hinge Holes