Installation Drawing (2 Of 2) - Generac Power Systems EcoGen G0061030 Installation Manuallines

Diagrams

Installation Drawing (2 of 2)

AIR OUTLET AIR OUTLET
HOLE LOCATIONS FOR HOLE LOCATIONS FOR
OPTIONAL MOUNTING TO OPTIONAL MOUNTING TO
A CONCRETE PAD A CONCRETE PAD
10.0 [3/8] DIA. CLEARANCE 10.0 [3/8] DIA. CLEARANCE
HOLE (2) PLACES, HOLE (2) PLACES,
3/8 DIA. MASONRY ANCHOR 3/8 DIA. MASONRY ANCHOR
BOLTS RECOMMENDED BOLTS RECOMMENDED
HOLE LOCATIONS FOR HOLE LOCATIONS FOR
OPTIONAL MOUNTING TO OPTIONAL MOUNTING TO
A CONCRETE PAD A CONCRETE PAD
16.0 [5/8] DIA. CLEARANCE 16.0 [5/8] DIA. CLEARANCE
HOLE (2) PLACES, HOLE (2) PLACES,
3/8 DIA. MASONRY ANCHOR 3/8 DIA. MASONRY ANCHOR
BOLTS RECOMMENDED BOLTS RECOMMENDED
RIGHT SIDE VIEW RIGHT SIDE VIEW
46
TOP VIEW TOP VIEW
353.7 353.7
[13.9] [13.9]
560.0 560.0
[22.0] [22.0]
FRONT OF UNIT FRONT OF UNIT
179.0 179.0
300.4 300.4
[7.0] [7.0]
[11.8] [11.8]
AIR INTAKE AIR INTAKE
457.2 457.2
[18.0] [18.0]
1154.0 1154.0
[45.4] [45.4]
446.6 446.6 389.7 389.7
[17.6] [17.6] [15.3] [15.3]
FUEL INLET - 3/4" NPT FUEL INLET - 3/4" NPT
REQUIRED FUEL PRESSURE: NATURAL GAS : 3.5-7" WATER COLUMN REQUIRED FUEL PRESSURE: NATURAL GAS : 3.5-7" WATER COLUMN
LIQUID PROPANE (VAPOR) : 10-12" WATER COLUMN LIQUID PROPANE (VAPOR) : 10-12" WATER COLUMN
MAIN AC/CONTROL WIRING HOLE FOR 3/4" CONDUIT MAIN AC/CONTROL WIRING HOLE FOR 3/4" CONDUIT
MAIN AC/CONTROL WIRING HOLE FOR 1 1/4" CONDUIT MAIN AC/CONTROL WIRING HOLE FOR 1 1/4" CONDUIT
REAR VIEW REAR VIEW
Installation Guidelines for 60 Hz EcoGen™ Generator
914 [36.0] 914 [36.0]
MINIMUM OPEN AREA MINIMUM OPEN AREA
ON SIDES AND FRONT ON SIDES AND FRONT
AIR INTAKE AIR INTAKE
36.0 36.0
[1.4] [1.4]
44.8 44.8
[1.8] [1.8]
**ALL DIMENSIONS IN: **ALL DIMENSIONS IN:
MILLIMETERS [INCHES] MILLIMETERS [INCHES]
001476b