Brinkmann 810-8503-SB Owner's Manual page 27

Retaining Nut
Electrode
LED Light Lead
LED Light
Thermocouple
Sear Burner
Orifi ce Bracket
Sear Burner
Igniter Lead
Black Wire
White
Wire
White Wire
Wire
Step 13
Remove the retaining nut from
the top of the thermocouple, and
insert the thermocouple into the
hole in the sear burner as shown.
Reattach nut on the other side
and tighten.
Step 14
Remove the pre-attached screws
from the sear burner. Use the
screws to connect the sear burner
office bracket as shown and
tighten with screwdriver.
Step 15
Connect the sear burner igniter
lead wire to the electrode on the
sear burner as shown.
Step 16
Attach sear burner LED light wire
Black
to the LED light lead coming from
Wire
grill body. Be sure to align white
wires with each other and black
wires with each other.
26