Advertisement
Clearing Settings
Clearing All Programs
The all clear function can be used to delete all cam programs, the
settings for advance angle compensation function, and all other
settings. All settings in the Function Setting Mode will be returned to
their default settings.
Mode
Set the mode switch to PRGM or TEST.
PRGM
TEST
RUN
Initial Display
PRG
STEP
CAM
Press the
CLEAR
PRG
STEP
CAM
Press the
WRITE
Key
CLEAR
After the completion of all clear
PRG
processing, the screen displays end for
approximately one second and then
resume the previously displayed screen.
If the
pressing the
not be deleted and the previous display
will be resumed.
Key for 3 s min.
Confirm that clr flashes on the display.
Key.
Key is pressed again before
CLEAR
Key, the settings will
WRITE
Clearing Individual Steps, Cams, and Banks
ON/OFF angle settings can be deleted by step, by cam, or by bank. If
settings are deleted by cam, the settings for the advance angle
compensation (ADV) function will not be deleted. If settings are
deleted by bank, the settings for the ADV function will also be
deleted. Settings in the Function Setting Mode will not be deleted.
Mode
PRGM
TEST
RUN
Initial Display
PRG
CAM
STEP
Press the
CLEAR
Screens for Individually Clearing Items
Deleting Settings by Step
PRG
Press the STEP Keys
to specify the step to be
deleted.
STEP
CAM
Deleting Settings by Cams
PRG
Press the CAM Keys
specify the cam to be
deleted.
CAM
STEP
Deleting Settings by Banks
PRG
Press the
specify the bank to be
deleted.
STEP
CAM
Press the
WRITE
Key.
CLEAR
After the completion of all clear
PRG
processing, the screen displays end for
approximately one second and then
resume the previously displayed screen.
If the
pressing the
not be deleted and the previous display
will be resumed.
H8PS
Set the mode switch to PRGM or TEST.
Key.
to
Key to
BANK
Key.
Key is pressed again before
CLEAR
Key, the settings will
WRITE
25
Advertisement
