Kohler Dolce Vita K-2815 Installation Manual page 7

Apply Black
Silicone
Sealant
2. Install the Lavatory
Wall-Mount Bracket Installations
Install the faucet to the wall according to the faucet
manufacturer's instructions.
Install the drain to the lavatory according to the drain
manufacturer's instructions.
Apply black silicone sealant (provided) to the bottom of the three
lavatory feet.
CAUTION: Risk of personal injury or product damage. Cast
iron lavatories are very heavy. Get help lifting the lavatory into
place.
Position the lavatory on the bracket so the "Kohler" logo is to the
back, and so all three lavatory feet contact the bracket. Confirm
correct position.
Apply a thin bead of black silicone sealant to fill the seams
between the lavatory and the bracket, as shown. Remove any
excess sealant, and fill any gaps. Use your finger to carefully
smooth the bead.
Allow the sealant to cure at least 24 hours before using the
lavatory.
Kohler Co. 7
Sealant
1018374-2-A