Kohler K-20099T-Y Installation Instructions Manual
Kohler K-20099T-Y Installation Instructions Manual

Kohler K-20099T-Y Installation Instructions Manual

Touchless urinal

Advertisement

Quick Links

BEFORE YOU BEGIN
BEFORE YOU BEGIN
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2018).
·
The product complies with GB 6952-2015, GB 28377-
2019.
RECOMMENDED TOOLS AND MATERIALS(NOT SUPPLIED)
RECOMMENDED TOOLS AND MATERIALS(NOT SUPPLIED)
·
Open end/adjustable wrenches
·
Tape measure
·
Basin wrench
·
Pipe wrench
·
Square
·
Level
·
Pliers
·
Socket wrench with sockets
·
Screw driver
·
Seal tape
·
Connection wire
·
Wire cutter
·
Insulation tape
·
Bushing
·
Drill
·
Sealant
No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137
8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA
NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC
1298232-T01-C
please leave instructions for the
K-20099T-YC05(0.5L AC/0.5
K-20099T-C05(2.5L AC/2.5
·
·
·
·
2018)
·
GB 6952-2015 GB 28377-2019
·
/
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
2
528137
8
256410
1
110400
©
Copyright Kohler China Investment Co., Ltd. 2020
-1-
©
PAPER
INSTALLATION INSTRUCTIONS
TOUCHLESS URINAL
K-20099T-Y(0.5L DC/0.5
K-20099T-W(1L DC/1
K-20099T-WC05(1L AC/1
K-20099T(2.5L DC/2.5
ASME
(A112.19.2-
(
)
POST CODE:
256410
POST CODE:
)
)
)
)
)
)
-
:
110400
2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K-20099T-Y and is the answer not in the manual?

Questions and answers

Summary of Contents for Kohler K-20099T-Y

  • Page 1 · · Drill · · Sealant No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137 528137 8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA POST CODE: 256410 256410 NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC...
  • Page 2: Specifications

    SPECIFICATIONS Model K-20099T-Y K-20099T-YC05 220V AC 50/60Hz Power 2 AAA size alkaline batteries " " Liter per flushing Water pressure at 0.18~0.55 MPa: Average flushing no more than 0.5L Temperature Environmental temperature: 1 to 55 C Starting pressure 0.05~0.86MPa 70cm away from sensing window (Automatic adjustiment range: 50~70cm)
  • Page 3 50ext 148** Supply 600* 85** Kohler reserves the right to change marked dimensions without prior notice. Notice: a. The dimensions above are just for reference. b. The layout dimensions of water inlet and outlet see installation step A(Install the hook).
  • Page 4: Installation

    INSTALLATION A. Install hangers Locate the position for the hook and install the hook. 148** 85** 464* Supply B. Install waste pipe connector Pre-install the waste pipe connector. In step C, waste pipe connector shall be adjusted to match with the plastic pipe of the urinal.
  • Page 5 D. Adjust the hanger 1. As shown in the picture below, firmly press the hanger with the bolt through the waist-shaped hole. Fixing Hole Waist-shaped Hole 2. As shown in the picture below, if the position of the urinal needs to be adjusted, please take down the urinal and knock the hanger slightly to adjust its position upwards and downwards.
  • Page 6 F. Install the Valve Install the valve into the urinal. Fasten with screw and gasket. G. Power connection 1. Please install K-20099T-YC05/K-20099T-WC05/K-20099T- C05(AC) as below: 1) Please match AC power unit when installing K-20099T- Outlet Downwards Outlet Upwards YC05/K-20099T-WC05/K-20099T-C05(AC). CAUTION: a.
  • Page 7 Install waste pipe as necessary to conform to the roughing-in dimensions. Install adequate support framing for the hangers as needed. 2. The way of K-20099T-Y/K-20099T-W/K-20099T installation K-20099T-Y/K-20099T-W/K-20099T( is as below. Take out the battery box from the bracket assy. Loose the screws of the battery box assy with a screw driver.
  • Page 8 USER S GUIDE Don t use this system until the power is on for 10 minutes. The sensing distance will be adjusted and the system will not work during this time. Working Status Before powering the system on, chear the unwanted objects in front of the sensor window lest shortening the sensing distance.
  • Page 9 Manual Flushing Approach the supplied special magnetic stick (flushing control stick) to the sensor lens. The system is now at a manual status and the indicator will flash every 1 seconds. Approach the flushing control stick to the sensor lens once, it'll flush once.
  • Page 10: Maintenance

    MAINTENANCE Urinal Repair When repairing, you don t have to dismount the sensor. Cover the sensing window with tape and work with ease. Notice : Don t use very adhesive tape in case the scar will be hard to remove. Clean the Filter Screen If the flushing volume reclines sharply after installation or used for a long time with no cause from water pressure, the...
  • Page 11: Troubleshooting

    2. Wash the filter of valve core with a brush. Battery indicating light Out of electricity. Replace batteries. keeps flashing and no (Only for K-20099T-Y/K20099T-W/K-20099T) flushing. If the trouble remains after above-mentioned actions are taken, please contact with us via distributor. K-20099T-Y/K20099T-W/K- 20099T)
  • Page 12: Important Consumer Information

    IMPORTANT CONSUMER INFORMATION Consumer Responsibilities 1. Do not attack the sensor. 2. Do not directly flush the sensor with water. The sensor is an electronic instrument. 3. Do not let sunlight or other light source enter or be reflected into Sensor Window. 4.

Table of Contents