Honeywell FIRE-LITE MS-10UD Series Manual page 83

Master Programming Level
Communication Format
CENTRAL STATION
1=COMM FORMAT
2=EVENT CODES
Primary/Secondary Screen #3
The Communication Format is determined by the type of receiver that the DACT is transmitting to. Consult your Central Station for
proper selection or consult our factory representatives. For any format chosen, the control panel automatically programs all of the event
codes.
Select the Communication Format by pressing the corresponding number key while viewing the Comm Format screen. The following
table describes each format:
MS-5UD & MS-10UD Series Manual — P/N 52626:C7 6/12/2018
Pressing 1 while viewing Primary/Secondary Screen #3 will cause the following screen to be displayed:
Screen Selection
ADEMCO CONTACT ID
SIA-DCS-8
SIA-DCS-20
Table 3.2 Communication Formats
COMM FORMAT
1=ADEMCO CONTACT ID
2=SIA-DCS-8
3=SIA-DCS-20
Communication Format Description
Contact ID, DTMF, 1400/2300 ACK
Security Industry Association, 8 messages per call
Security Industry Association, 20 messages per call
Programming
83