Camera Installation
Removing the Dome Cover
1
Loosen the screws counterclockwise using the
allen wrench provided with the product.
2
Remove the dome cover.
Inserting a SD Memory Card
Insert a SD memory card into the SD memory card slot
with the 'micro SD' print facing upward.
Push the SD memory card until it disengages from
the slot, and then pull it out.
Network Camera
microSD Logo is a trademark of SD-3C, LLC.
Installation
• Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall
or ceiling is not strong enough to support its
weight.
• Install the camera in a shaded area. If the camera
is installed in direct sunlight, it may be affected
adversely.
1
Use the screws, anchor provided with the camera
to secure the install bracket on a wall or a ceiling.
Use the provided guide pattern to check the
distance between the screws.
2
Push the network cable through the cable rubber,
using the protective connector provided.
Cable rubber
Protect
Cable
connector
5