Hide thumbs Also See for DC-I6212WRX:

Advertisement

Quick Links

Network
Camera
Quick Guide
DC-I6212WRX
Powered by

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DC-I6212WRX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Idis DC-I6212WRX

  • Page 1 Network Camera Quick Guide DC-I6212WRX Powered by...
  • Page 2: Safety Precautions

    Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated.
  • Page 3: Fcc Compliance Statement

    IDIS Co., Ltd. reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
  • Page 4 Quick Guide 7pin cable (Alarm cable), 2pin cable (Power cable) Please download software (IDIS Discovery, IDIS Center, IDIS Solution Suite Compact) and product manual from this link : - IDIS Website (www.idisglobal.com) - Search IDIS Discovery, IDIS Center, IDIS Solution Suite Compact.
  • Page 5: Camera Installation

    Bottom Push the SD memory card until it disengages from the slot, and then pull it out. Installation • Check the wall or ceiling to see if it needs to be reinforced. The camera may fall off if the wall or ceiling is not strong enough to support its weight.
  • Page 6 To pass through a thin cable or more than two cables like the power and the audio connector provided with the product, it is advised to finish it using silicon to make sure Attach the enclosed desiccant to prevent moisture. waterproofed perfectly.
  • Page 7 Use the screws, anchor provided with the product to secure the install body on a wall. Use the provided guide pattern to check the distance between the screws. Tighten the screw while pushing the bottom part of the camera body. Connect external devices, the network cable, and the power adapter.
  • Page 8 Connecting electric door strike • Select N.C. (Normal Close) when using the Fail-Safe type door strike. • Select N.O. (Normal Open) when using the Fail-Secure type door strike.
  • Page 9: Specifications

    Specifications Vandal Resistance Out-door Ready IP66 Operating Temperature -30°C ~ +55°C (-22°F ~ +131°F) Boot Up Temperature 0°C ~ +55˚C (32°F ~ +131˚F) Operating Humidity 0% ~ 90% Power Source , PoE(IEEE 802.3af, Class 3) Power Consumption , 1.87A, 22.4W (DC OUTPUT: 12V , 1A MAX) PoE, IEEE 802.3af (Class 3), 9.5W...
  • Page 12 IDIS Co., Ltd. For more information, please visit www.idisglobal.com...

Table of Contents