Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Idis DC-D4216RX
Summary of Contents for Idis DC-D4216RX
- Page 1 DC-D Series Installation Manual DC-D4216X DC-D4216RX DC-D4216WRX Powered by...
- Page 2 Before reading this manual This is a basic installation manual for use of an IDIS network camera. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and heed to the warnings and precautions contained herein while using the product.
- Page 3 Before reading this manual Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1.
- Page 4 IDIS Co., Ltd. reserves all rights concerning this operation manual. Use or duplication of this operation manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this operation manual are subject to change without prior notice for reasons such as functionality enhancements.
-
Page 5: Table Of Contents
Table of Contents Part 1 – Introduction ......... 6 Product Features . -
Page 6: Part 1 - Introduction
• IP filtering, HTTPS, SSL, IEEE 802.1X, and configurable user authority levels for greater security • Network bandwidth limitation and MAT features for DC-D4216X / DC-D4216RX / DC-D4216WRX is an IP- more efficient use of network bandwidth based network camera that compresses and transmits •... -
Page 7: Accessories
Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. External appearances and colors of the accessories may vary depending on the model. DC-D4216X, DC-D4216RX DC-D4216WRX Guide Pattern Network Camera Quick Guide Screws (2 ea.) -
Page 8: Overview
Part 1 – Introduction Overview Body Product color and design may vary depending on the DC-D4216X model. Dome Cover DC-D4216X / DC-D4216RX DC-D4216WRX... - Page 9 Network Port SD Memory Card Slot Cable Access Hole Alarm I/O, Audio I/O Wall/Ceiling Installation Hole Cable Rubber • IR LED A sensor inside the system monitors lighting levels and activates the IR LED during low-lighting DC-D4216RX, DC-D4216WRX models only conditions.
- Page 10 For more information on network connection setup, purchase a separate speaker system with a built-in refer to the IDIS Discovery operation manual. amplifier. - I (In): Connect an audio source to this port. (Line in) The following table describes the network cable A built-in microphone is featured on the front.
-
Page 11: Factory Reset
It's also possible to do a factory reset by pressing and releasing the reset button while the camera is turned on or using the IDIS Discovery program from a remote location. A factory reset will reboot the system. For more information on factory reset, refer to the IDIS Discovery operation manual. -
Page 12: Installation
For more information on other devices comprising the overall system, refer to their respective installation manuals. Product color and design may vary depending on the model. Removing the Dome Cover DC-D4216X / DC-D4216RX Remove the dome cover. Turn the dome cover counterclockwise. Remove the dome cover. -
Page 13: Inserting A Sd Memory Card
Angle Adjustment. adversely. DC-D4216WRX DC-D4216X / DC-D4216RX Push the network cable through the cable rubber, Use the screws, anchors provided with the camera to using the protective connector provided. secure the bottom cover on a wall or a ceiling. - Page 14 Part 1 – Introduction Assemble the cable rubber to the bottom cover. Connect external devices, the network cable, and the power adapter. Adjust the angle. For more information, refer to the Angle Adjustment. Attach the enclosed desiccant to the designated space inside the dome cover using double-sided tape as shown below.
-
Page 15: Angle Adjustment
Part 1 – Introduction Angle Adjustment Closing the Dome Cover The lens can be rotated along three axes. DC-D4216X / DC-D4216RX Attach the dome cover to the bottom cover. Turn the dome cover clockwise to fasten the dome cover. Lens Rotation... -
Page 16: Dimension
Part 1 – Introduction Dimension DC-D4216WRX DC-D4216X / DC-D4216RX Ø 120mm Ø 110mm... -
Page 17: Part 2 - Camera Connection
Part 2 - Camera Connection Use the camera by connecting to DirectIP™ NVR or non DirectIP™ NVR, VMS such as IDIS Solution Suite Compact. With DirectIP™ NVR-based Layout Power Network Camera Power Monitor Out Network Remote Monitoring DirectIP™ NVR makes it easy to use cameras without extra network configurations. -
Page 18: With Non Directip™ Nvr-Based Layout
Ideal for using the camera over the network from a remote location. The contents in the camera operation manual are only for users using the camera with non DirectIP™ NVR connection or VMS connection such as IDIS Solution Suite Compact. -
Page 19: Part 3- Appendix
ID and password as a safety precaution. camera. Unable to launch IDIS Web. If the IDIS Web login screen is not loading, check which version of Microsoft Internet Explorer you are using. IDIS Web may not launch properly on versions 8.0 or below. -
Page 20: Specifications
H: 111.6° / V: 61.45° / D: 127.3° Min. DC-D4216X COLOR : 0.04 lux Illumination B/W : 0.02 lux DC-D4216RX, COLOR : 0.04 lux DC-D4216WRX B/W : 0 lux (IR LED ON) Dynamic Range 120dB, True WDR Electronic Shutter Speed Auto / Manual (1/30 ~ 1/10,000), Anti-Flicker, Slow Shutter(1/7.5, 1/15) - Page 21 Quadruple Ethernet RJ45(10/100BASE-T) Audio In/Out Line-in 1ea / Line-out 1ea / Internal Mic 1ea DC-D4216X, DC-D4216RX models only Alarm In 1 TTL, NC/NO Programmable, 4.3V(NC) or 0.3V(NO) threshold, 5V DC Alarm Out 1 TTL open collector, Max. load: 30mA, Max. voltage: 5VDC...
- Page 22 IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...
Need help?
Do you have a question about the DC-D4216RX and is the answer not in the manual?
Questions and answers