Trouble Shooting - Daewoo DWD-M12CK Instruction Manual

TROUBLE SHOOTING

Most problems are easily solved if you understand the cause.
Check the following list for problem before calling for service.
Problem
Plug is loose or not plugged in.
Program dose not
Power failure.
start.
Loading door is not closed.
Program is not selected.
Start/hold button is not pressed.
Water tap is not turned on.
Water dose not enter
Inlet hose is kinked or folded.
the washing
Filters is blocked in water inlet filter.
machine.
Drain hose is kinked or clogged.
Washing machine is
Pump filter is clogged.
not drain.
The amount of laundry is too small.
Washing machine is
not spin.
The laundry is unbalanced.
Drain hose is placed over 1m above the
Spin result is
floor.
unsatisfactory.
Too much detergent or unsuitable
Foam come out of
detergent used.
the detergent case.
Transit bolts are not removed.
Serious noise and
Washing machine is installed on uneven
vibration
floor.
Washing machine is not leveled.
■
DISPLAY ERROR MESSAGE
MESSAGE ERROR
IE WATER
The water tap is closed.
INLET
The filter of the valve inlet is clogged.
ERROR
The valve inlet is an inferior product or broke down.
The water level sensor (sensor pressure) is an inferior
product or broke down.
The drain motor works during water supply.
The PCB ASS'Y does not check the water level.
DRAIN
OE The drain hose is kinked or clogged.
ERROR
The drain motor is an inferior product.
The valve inlet works during drain.
The water level sensor is an inferior product.
The PCB ASS'Y does not check the water level.
UNBALANCE
UE The laundry is concentrated to one side of the drum
ERROR
during spin.
DOOR
LE The Start/Hold button is pressed while the door is
OPEN
opened.
ERROR
The switch door lock is an inferior product.
The PCB ASS'Y does not check the door lock.
Cause
Insert plug tightly.
An interrupted program will be resumed when the
power return.
Check whether laundry is trapped in door.
Close the loading door. (a click should be heard)
Select the desired program.
Press the Start/hold button.
Turn the water tap on.
Straighten the inlet hose.
Clean the water inlet filter.
Straighten and clean the drain hose.
Clean the pump filter
Add the laundry to balance.
And repeat the Spin cycle.
Rearrange the laundry. And repeat the Spin cycle.
If articles of heavy clothing (e.g. bath robe) are
loaded, washing machine may skip or stop the spin
cycle.
Place the drain hose under 1m above the floor.
Repeat the Rinse cycle.
Remove the transit bolts
Reinstall washing machine on even floor.
Adjust the level of washing machine using adjustable
legs.
CAUSE
15
Solution
SOLUTION
Open the water tap.
Clean the filter of the valve inlet.
Change the valve inlet.
Change the water level sensor
(sensor pressure).
Change the drain motor.
Change the PCB ASS'Y.
Clean and straighten the drain hose.
Change the drain motor.
Change the valve inlet
Change the water level sensor.
Change the PCB ASS'Y.
Rearrange the laundry.
Close the door.
Change the switch door lock.
Change the PCB ASS'Y.