Click
, system goes to the following interface. The options here are defined by the protocol. The aux
number is corresponding to the aux on-off button of the decoder. See Figure 3-91.
3.8 Record Settings
After setting the record and snapshot plan, the system automatically performs record and snapshot
according to the preset plan.
The factory default record mode is 24-hour continuous recording. You can set the record time and type
according to the actual needs. For details, see chapter 3.4.6 Schedule.
3.9
Search and Playback
3.9.1
Real-time Playback
Please refer to chapter 3.6.3 for real-time playback information.
3.9.2
Search Interface
From Main menu->Search, or on the preview interface right click mouse and then select search item, you
can go to the following interface. See Figure 3-92 or Figure 3-93.
Figure 3-91
104