Preview - Dahua NVR608-32-4KS2 User Manual

3.6 Preview

After device booted up, the system is in multiple-channel display mode. See Figure 3-53.Please note the
displayed window amount may vary. The following figure is for reference only.
3.6.1 Preview
If you want to change system date and time, you can refer to general settings (Main
Menu->Setting->System->General). If you want to modify the channel name, please refer to the
display settings (Main Menu->Camera->CAM name)
Please refer to the following sheet for detailed information.
SN Icon
1
2
3
4
5
Tips

Preview drag: If you want to change position of channel 1 and channel 2 when you are
previewing, you can left click mouse in the channel 1 and then drag to channel 2, release mouse
you can switch channel 1 and channel 2 positions.

Use mouse middle button to control window split: You can use mouse middle button to switch
window split amount.
Figure 3-53
Function
When current channel is recording, system displays this icon.
When motion detection alarm occurs, system displays this icon.
When video loss alarm occurs, system displays this icon.
When current channel is in monitor lock status, system displays this
icon.
When the device remotely connects Wi-Fi IPC, this icon is displayed
on the screen of the corresponding channel.
Only some devices support this function.
78