Preview; Real-Time Monitor Channel - Dahua NVR608-32-4KS2 User Manual

Step 3 Click OK.
System enters the following interface. See Figure 4-14.
Note
After clicking OK, we will collect your personal information such as cell phone number, MAC
address and device serial number. The collected information is used for verifying device legality
and sending security code. Please read the notice carefully and confirm if you agree with the
collection or not.
Step 4 Follow the prompts on the interface and then scan the QR code to get the security code.
CAUTION
 For the same QR code, max scan twice to get two security codes. Refresh the QR code if
you want to get security code again.
 The security code on you email is only valid for 24 hours.
 After five times security code failure, the admin account will be locked for 5 minutes.
Step 5 Input the security code in the email and then click Next button.
Step 6 Input new password and then confirm.
Note
The password can be set from 8 characters through 32 characters and contain at least two types
from number, letter and special character (excluding"'", """, ";", ":" and "&"). It is recommended to
set password of high security according to the prompts.
Step 7 Click OK button to complete the setup.

4.5 Preview

4.5.1

Real-time Monitor channel

Figure 4-14
253