Preview Tour Parameters - Dahua NVR608-32-4KS2 User Manual


Human face: System will display human face information on the right pane of the preview interface.
See Figure 3-67.

POS info: Check the box, system will display POS information on the preview interface.
Click OK button to save current setup.

3.6.6.2 Preview Tour Parameters

Set preview display mode, channel display sequence and tour setup.

Set preview display mode: On the preview interface, right click mouse, you can view right-click menu.
Now you can select preview window amount and channel.

Set channel display mode: On the preview interface, if you want to change channel 1 and channel 16
position, please right click channel 1 video window and then drag to the channel 16 video window,
release button, you can change channel 1 and channel 16 position.

Tour setup: Here you can set preview window channel display mode and interval. Please follow the
steps listed below.
From Main menu->Setting->System->Display->Tour, you can see an interface shown as in Figure 3-68.
Here you can set tour parameter.

Screen No.: Please select screen from the dropdown list.

Video detect: It is to set video detect tour. System supports 1/8-window tour.

Alarm: It is to set alarm tour. System supports 1/8-window tour.

Enable tour: Check the box here to enable tour function.

Interval: Input proper interval value here. The value ranges from 1-120 seconds.

Window split: It is to set window split mode.
Figure 3-67
88