3. Setup the AMG1302-T10B/AMG1202-T10B as a DHCP Relay
What is DHCP Relay?
DHCP stands for Dynamic Host Configuration Protocol. In addition to the
DHCP server feature, the AMG1302-T10B/AMG1202-T10B supports the
DHCP relay function. When it is configured as DHCP server, it assigns the IP
addresses to the LAN clients. When it is configured as DHCP relay, it is
responsible for forwarding the requests and responses negotiating between
the DHCP clients and the server. See figure 1.
Setup the AMG1302-T10B/AMG1202-T10B as a DHCP Relay
We could set the AMG1302-T10B/AMG1202-T10B as a DHCP Relay by the
following command in CLI:
dhcrelay
[Server IP Address]
4. SUA Notes
Tested SUA/NAT Applications (e.g., Cu-SeeMe, ICQ, NetMeeting)
All contents copyright © 2013 ZyXEL Communications Corporation.
AMG1202-T10B/AMG1302-T10B
Support Notes
43