ZyXEL Communications P-334W User Manual page 232

Prestige 334W User's Guide
LABEL
Local Content
Secure Gateway
Address
Peer ID Type
16-22
Table 16-8 VPN IKE: Advanced
When you select IP in the Local ID Type field, type the IP address of your
computer in the local Content field. The Prestige automatically uses the IP
address in the My IP Address field (refer to the My IP Address field description)
if you configure the local Content field to 0.0.0.0 or leave it blank.
It is recommended that you type an IP address other than 0.0.0.0 in the local
Content field or use the DNS or E-mail ID type in the following situations.
When there is a NAT router between the two IPSec routers.
When you want the remote IPSec router to be able to distinguish
between VPN connection requests that come in from IPSec routers with
dynamic WAN IP addresses.
When you select DNS or E-mail in the Local ID Type field, type a domain name
or e-mail address by which to identify this Prestige in the local Content field. Use
up to 31 ASCII characters including spaces, although trailing spaces are
truncated. The domain name or e-mail address is for identification purposes only
and can be any string.
Type the WAN IP address or the URL (up to 31 characters) of the remote secure
gateway with which you're making the VPN connection. Set this field to 0.0.0.0 if
the remote secure gateway has a dynamic WAN IP address (the IPSec Keying
Mode field must be set to IKE).
Select IP to identify the remote IPSec router by its IP address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.
DESCRIPTION
VPN Screens