Prestige 334W User's Guide
The following table describes the labels in this screen.
LABEL
WAN
The default WAN connection is "1' as your broadband connection via the WAN port
should always be your preferred method of accessing the WAN. The default priority of
Traffic
the routes is WAN and then Traffic Redirect.
Redirect
Apply
Click Apply to save your changes back to the Prestige.
Reset
Click Reset to begin configuring this screen afresh.
9.4
Configuring WAN ISP
To change your Prestige's WAN ISP settings, click WAN, then the WAN ISP tab. The screen differs by the
encapsulation.
9.4.1 Ethernet Encapsulation
The screen shown next is for Ethernet encapsulation.
9-2
Figure 9-1 WAN: Route
Table 9-1 WAN: Route
DESCRIPTION
WAN Screens