FIELD
Ping Host
WAN DHCP Release
WAN DHCP Renewal
Internet Setup Test
Reboot System
Host IP Address=
Enter the number of the selection you would like to perform or press [ESC] to cancel.
System Information and Diagnosis
Table 33-4 System Maintenance Menu Diagnostic
Enter 1 to ping any machine (with an IP address) on your LAN or WAN. Enter
its IP address in the Host IP Address field below.
Enter 2 to release your WAN DHCP settings.
Enter 3 to renew your WAN DHCP settings.
Enter 4 to test the Internet setup. You can also test the Internet setup in Menu
4 - Internet Access. Please refer to the Internet Access chapter for more
details. This feature is only available for dial-up connections using PPPoE or
PPTP encapsulation.
Enter 11 to reboot the Prestige.
If you entered 1 in Ping Host, then enter the IP address of the computer you
want to ping in this field.
Prestige 334W User's Guide
DESCRIPTION
33-11