Back To Factory Defaults; Figure 19-13 Configuration Restore Error; Restart Screen; Figure 19-14 Factory Defaults - ZyXEL Communications P-334W User Manual

Prestige 334W User's Guide

Figure 19-13 Configuration Restore Error

19.7.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and returns the
Prestige to its factory defaults as shown on the screen. The following warning screen will appear.

Figure 19-14 Factory Defaults

You can also press the RESET button on the rear panel to reset the factory defaults of your Prestige. Refer to
the Hardware Installation chapter for more information on the RESET button.

19.8 Restart Screen

System restart allows you to reboot the Prestige without turning the power off.
Click MAINTENANCE, and then Restart. Click Restart to have the Prestige reboot. This does not affect
the Prestige's configuration.
Maintenance 19-11