Leica NA300 Series User Manual page 4

Introduction
Purchase
Product Identifica-
tion
Symbols
Validity of this
manual
Available Documen-
tation
NA320/24/32, Introduction
Congratulations on the purchase of a Leica NA320/24/32.
This manual contains important safety directions as well as instructions for setting up
the product and operating it. Refer to "1 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
The type and serial number of your product are indicated on the type plate.
Always refer to this information when you need to contact your agency or Leica
Geosystems authorised service workshop.
The symbols used in this manual have the following meanings:
Type Description
Indicates an imminently hazardous situation which, if not
DANGER
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation or an unintended
WARNING
use which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation or an unintended
CAUTION
use which, if not avoided, may result in minor or moderate
injury.
Indicates a potentially hazardous situation or an unintended
NOTICE
use which, if not avoided, may result in appreciable material,
financial and environmental damage.

Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.
This manual applies to the NA320/24/32 instruments. Differences between the
various models are marked and described.
Name Description/Format
NA320/24/32 All instructions required in order to operate the
User Manual product to a basic level are contained in the User
Manual. Provides an overview of the product together
with technical data and safety directions.
en

-
2