Table of Contents
Advertisement
Optional accessories
Insulated assembly pipe,
Ø 6.35 mm (1)
Insulated assembly pipe,
Ø 12.70 mm (1)
✴✴12/18✴✴
Drain Hose, 2 m long (1)
Pipe clamp A (3)
PE T3 foam tube
insulation (1)
Drain plug (1)
(AR✴✴HP/JP/KP/MP✴✴)
Cement nail (6)
3-wire assembly cable (1)
✴✴JC/KC✴✴
✴✴18/24✴P✴✴LN/PF/SG
✴✴24KP✴✴RC
30 English
DB68-06031A-01_A5.indd 30
Insulated assembly pipe,
Ø 9.52 mm (1)
✴✴09✴✴
Insulated assembly pipe,
Ø 15.88 mm (1)
✴✴24✴✴
Pipe clamp B (3)
Vinyl tape (2)
Putty 100 g (1)
M4 x 25 tapped screw (6)
5-wire assembly cable (1)
✴✴09/12✴P✴✴
✴✴18KP✴✴RC
2-wire assembly cable (1)
✴✴18/24✴P✴✴LN/PF/SG
✴✴24KP✴✴RC
Accessories in the outdoor unit package
Rubber leg (4)
NOTE
• A flare nut is attached to the end of each pipe of an
evaporator or a service port. Use flare nuts when
connecting the pipes.
• Wire assembly cables are optional. If they are not
supplied, use standard cables.
• The drain plug and the rubber legs are included
only when the air conditioner is supplied without
assembly pipes.
• If these accessories are supplied, they are in the
accessory package oroutdoor unit package.
Tools
General tools
• Vacuum pump
(Backward flowing prevention)
• Manifold gauge
• Stud finder
• Torque wrench
• Pipe cutter
• Reamer
• Pipe bender
• Spirit level
• Screwdriver
• Spanner
• Drill
• L-wrench
• Measuring tape
Tools for test operation
• Thermometer
• Resistance meter
• Electroscope
4/18/2017 8:59:41 AM
Advertisement
Table of Contents
