Table of Contents
Advertisement
User Manual of Network Fisheye Camera
3. Configure the 802.1X settings, including EAPOL version, user name and
password.
Note:
The EAPOL version must be identical with that of the router or the switch.
4. Enter the user name and password to access the server.
5. Click Save to finish the settings.
Note:
A reboot is required for the settings to take effect.
5.3.7 Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
Steps:
1. Enter the QoS Settings interface:
Configuration >Advanced Configuration > Network > QoS
2. Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and
Management DSCP.
The valid value range of the DSCP is 0-63. The bigger the DSCP value is, the
higher the priority is.
Note:
DSCP refers to the Differentiated Service Code Point; and the DSCP value is
used in the IP header to indicate the priority of the data.
3. Click Save to save the settings.
Note:
A reboot is required for the settings to take effect.
Figure 5-16 QoS Settings
39
Advertisement
Table of Contents
