Table of Contents
Advertisement
User Manual of Network Fisheye Camera
At least 2 presets are required to set a patrol.
Setting a Patrol
Steps:
1. Click the icon
2. Select a path No. from the drop-down list, and click the icon
corner to add the presets as the key points.
3. Select the defined preset from the drop-down list, input the duration time at
each preset, and click OK to save the preset as the key point of patrol.
4. Repeat Step 3 to set other key points of the patrol.
5. Click the icon
to enter the patrol configuration interface.
Figure 4-8 Patrol Configuration
Figure 4-9 Setting Key Point of Patrol
to save the current patrol path.
25
in the lower-left
Advertisement
Table of Contents
