Setting The Network Camera Over The Wan; Static Ip Connection - OV Solutions C-OVE-6DVIR-FE User Manual

User Manual of Network Fisheye Camera
Figure 2-3 SADP Interface

2.2 Setting the Network Camera over the WAN

Purpose:
This section explains how to connect the network camera to the WAN with a static IP
or a dynamic IP.

2.2.1 Static IP Connection

Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP
address, you can connect the network camera via a router or connect it to the WAN
directly.
 Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.
11