Table of Contents
Advertisement
User Manual of Network Fisheye Camera
1. Click to select a PTZ View on the display window.
2. Click the direction / zoom buttons on the e-PTZ Control panel to adjust the PTZ
View as desired.
3. Select a preset number from the preset list.
4. Click the icon
The preset name turns from grey to black.
Note:
Up to 256 presets are supported.
Calling a Preset:
Purpose:
The PTZ View of the Fisheye camera can directly and quickly move to the area of
interest, which is defined as a preset.
Before you start:
Set the preset, and the icon
Steps:
1. Click to select a PTZ View on the display window.
2. Select the preset number from the list.
3. Click the icon
The selected PTZ View will move to the pre-defined preset scene.
to save the current PTZ View as the preset.
Figure 4-5 Setting a Preset
and
will appear on the preset list.
to call the selected preset.
23
Advertisement
Table of Contents
