Table of Contents
Advertisement
User Manual of Network Fisheye Camera
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 5.6.1 and Section 5.6.3 for detailed information.
Record Triggered by Line Crossing Detection
If you select Line Crossing Detection, the video will be recorded when the
line crossing event is detected.
Besides configuring the recording schedule, you have to set the detection
line and check the checkbox of Trigger Channel in the Linkage Method of
Line Crossing Detection Settings interface. For detailed information, please
refer to Section 5.6.6 Configuring Line Crossing Detection.
Record Triggered by Intrusion Detection
If you select Intrusion Detection, the video will be recorded when the
intrusion event is detected.
Besides configuring the recording schedule, you have to set the intrusion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Intrusion Detection Settings interface. For detailed information,
please refer to Section 5.6.7 Configuring Intrusion Detection.
(3) (Optional) Check the checkbox of Select All and click Copy to copy settings of
this day to the whole week. You can also check any of the checkboxes before
the date and click Copy.
(4) Click OK to save the settings and exit.
6. Click Save to save the settings.
6.3 Configuring Snapshot Settings
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The
captured picture can be stored in the SD card (if supported) or in the network disk
(For details, please refer to Section 6.1 Configuring NAS Settings). The captured
pictures can also be uploaded to a FTP server.
Timing Snapshot
73
Advertisement
Table of Contents
