Table of Contents
Advertisement
User Manual of Network Fisheye Camera
5.6 Configuring and Handling Alarms
This section explains how to configure the network camera to respond to alarm
events, including motion detection, video tampering, alarm input, alarm output,
exception, face detection, audio exception detection, intrusion detection, defocus
detection, and scene change detection, etc. These events can trigger the linkage
methods, such as Notify Surveillance Center, Send Email, Trigger Alarm Output, etc.
Note:
Check the checkbox of Notify Surveillance Center if you want to push the
alarm information to the surveillance client such as the mobile phone, computer, etc.,
as soon as the alarm is triggered.
5.6.1 Configuring Motion Detection
Purpose:
Motion detection is a feature which can take alarm response actions and record the
video for the motion occurred in the surveillance scene.
Steps:
1. Enter the Motion Detection Settings interface
Configuration > Advanced Configuration> Events > Motion Detection
Figure 5-33 Motion Detection Settings
2. Check the checkbox of Enable Motion Detection.
57
Advertisement
Table of Contents
