Table of Contents
Advertisement
User Manual of Network Fisheye Camera
3. (Optional) Check the checkbox of Enable Dynamic Analysis for Motion if you
want to mark the detected objects with green rectangles on the live view
window.
Note:
You can go to Configuration > Local Configuration > Live View
Parameters > Rules, and then select Disable for rules if you don't want the
detected objected displayed with the rectangles.
4. Configure the motion detection area settings.
Two types of configuration modes are selectable: Normal mode and Expert
mode.
Normal Mode
If Normal is selected as the configuration mode, one set of parameters are
adopted for motion detection without considering the day / night switch.
Figure 5-34 Motion Detection Settings-Normal Mode
(1) Click the Draw Area button to start drawing.
(2) Click-and-drag the mouse on the live video to draw a motion detection area.
(3) Click Stop Drawing to finish drawing.
(4) Repeat above steps to draw other detection areas.
(5) Click-and-drag the slider to set the sensitivity of the detection.
The sensitivity value ranges from 0 to 100. And the higher the value is, the
easier the motion can be detected.
58
Advertisement
Table of Contents
