5.10 Touch Driver Installation
TouchKit is the Touch software, which contains drivers of the touch
panel controllers for the specified communication connectors, RS232,
PS/2 and USB, and the other two utilities.
The two utilities are as follows:
Touch Tray support
This is utility for emulating the right and left button of mouse
through controlling touch panel. Users can toggle between
right or left mouse buttons by this utility.
Configuration support
The calibration and draw test of touch panel are done by this
utility. Besides, users can add or remove for new RS-232 or
PS/2 touch panel devices.
Follow these steps to install TouchKit.
Step.1
Insert the Driver Utility CD. Open the file document "TouchKit" to execute
the setup.
Step.2
Click on "Setup.exe" to execute the setup.
Users Manual
Rugged Computing
95
Rugged Table PCs