Lan Problem; Power Management Problems; Startup Problems - Wetif R10ID8M-RTXX User Manual

G. LAN Problem
Condition
I cannot access the network.
H. Power Management Problems
Condition
The tablet PC does not enter
Standby or Hibernation mode
automatically.
The tablet PC does not enter
Standby or Hibernation mode
immediately.
The tablet PC does not
resume from Standby or
Hibernation mode.
I. Startup Problems
Condition
When you turn on the tablet
PC, it does not respond and
the Power indicator does not
light green.
When you turn on the tablet
PC, it stops after POST.
Users Manual
Rugged Computing
Check Point
Make sure that the LAN cable is properly
connected to the RJ-45 connector and the
network hub.
Make sure that the network configuration is
appropriate.
Make sure that the user name or password is
correct.
Check Point
If you have a connection to another computer,
the tablet PC does not enter Standby or
Hibernation mode if the connection is actively in
use.
Make sure that the Standby or Hibernation
time-out is enabled.
If the tablet PC is performing an operation, it
normally waits for the operation to finish.
The tablet PC automatically enters Standby or
Hibernation mode when the battery pack is
empty.
Do any one of the following:
- Connect the AC adapter to the tablet PC.
- Replace the empty battery pack with a fully
charged one.
Check Point
If you are using an external AC power, make
sure that the AC adapter is correctly and
securely connected. If so, make sure that the
electrical outlet works properly.
If you are using the battery power, make sure
that the battery is not discharged.
Wait awhile.
Restart your tablet PC.
107
Rugged Table PCs