3.2.4 Battery Low Signals and Actions
Battery Low occurs when the battery has approximately 10 % (Windows
default setting) of its charge remaining. The tablet PC's Battery Charge
Indicator ( ) blinks red to alert you take actions.
NOTICE:
1. You can set up the Battey Low threshold and signals under Windows.
Immediately save your data upon Battery Low. The remaining operating
time depends on how you are using the tablet PC. If you are using the
audio subsystem, PC card, hard or USB flash disk, the battery might run
out of charge very quickly.
2. Always respond to Battery Low by placing your tablet PC on the Standby
or Hibernation mode, turning off the tablet PC, or connecting the AC
adapter.
CAUTION:
1. If you do not take any action, the tablet PC will automatically hibernate
and turn off.
2. If you are using a PC card, do not access the card during battery low
periods. The access may takes longer time than battery to run out of
charge, thus making your access to the card fail.
3. If you fail to save your data when the battery completely runs out of
charge, then you will lose your data.
Users Manual
Rugged Computing
Rugged Table PCs
61