Wireless Lan Problem - Wetif R10ID8M-RTXX User Manual

K. Wireless LAN Problem
Condition
I cannot use the wireless LAN
feature.
Transmission quality is poor.
Radio interference exists.
I cannot connect to another
wireless LAN device.
I cannot communicate with the
computer in the network when
Infrastructure mode is
configured.
Users Manual
Rugged Computing
Check Point
Make sure that the wireless LAN feature is turned
on.
Your tablet PC may be in an out-of-range situation.
Move your tablet PC closer to the Access Point or
another wireless LAN device it is associated with.
Check if there is high interference around the
environment and solve the problem as described
next.
Move your tablet PC away from the device causing
the radio interference such as microwave oven and
large metal objects.
Plug your tablet PC into an outlet on a different
branch circuit from that used by the affecting
device.
Consult your dealer or an experienced radio
technician for help.
Make sure that the wireless LAN feature is turned
on.
Make sure that the SSID setting is the same for
every wireless LAN device in the network.
Your tablet PC is not recognizing changes. Restart
the tablet PC.
Make sure that the IP address or subnet mask
setting is correct.
Make sure that the Access Point your tablet PC is
associated with is powered on and all the LEDs are
working properly.
If the operating radio channel is in poor quality,
change the Access Point and all the wireless
station(s) within the BSSID to another radio
channel.
Your tablet PC may be in an out-of-range situation.
Move your tablet PC closer to the Access Point it is
associated with.
Make sure that your tablet PC is configured with the
same security option (encryption) to the Access
Point.
Use the Web Manager/Telnet of the Access Point to
check whether it is connected to the network.
Reconfigure and reset the Access Point.
109
Rugged Table PCs