General Information - Viking CVER5301 Installation Manual

Freestanding 30” w electric & 30” w induction ranges
Hide thumbs Also See for CVER5301:
Table of Contents

Advertisement

General Information

READ AND FOLLOW ALL WARNING AND
CAUTION INFORMATION WHEN INSTALLING
THIS APPLIANCE.
• All openings in the wall behind the appliance and in
the floor under the appliance must be sealed.
• DO NOT obstruct the flow of combustion and
ventilation air.
CAUTION
Avoid any damage to oven vents. The vents need to
be unobstructed and open to provide proper airflow
for optimal oven performance.
CAUTION
The cooling fan should be operating when the unit is
in operation. If you notice the cooling fan is not
operating or you observe unusual or excessive noise
coming from the cooling fan, contact a Viking
Authorized Service Center before continuing
operation. Failure to do so can result in damage to the
oven or surrounding cabinets.
Moving, Handling, and Unpacking
Remove and discard all packing materials,
including cardboard and tape on the outside and
inside of the range.
Range Do not discard the anti-tip metal brackets
supplied with the range. These are the anti-tip
devices and at least one must be installed with the
unit. Refer to "Anti-tip
Device Installation"
section.
Some stainless steel parts
may have a plastic
protective wrap which
must be peeled off. The
interior should be washed
thoroughly
with hot, soapy water to
remove film residues and any dust or debris before
being used, then rinsed and wiped dry. Solutions
stronger than soap and water are rarely needed.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ver53015 seriesVir5301Cvir5301

Table of Contents