Table of Contents
Advertisement
Surface Operation
Electric Ranges
Single Front or Rear Element
Push in and turn the control knob counterclockwise to the desired setting. The element will cycle on and off to maintain
the desired heat setting. When fi nished, turn all controls to "OFF. "
Front and Bridge Element
Push in and turn the right rear control knob clockwise to the desired setting. The rear element and the bridge element
will cycle on and off to maintain the desired heat setting. When fi nished, turn all controls "OFF. "
Hot Surface Indicator Lights
The range has four hot surface indicator lights. They are located in the center of the glass rangetop. The hot surface indicator light will glow
red when the corresponding element is heated. The light will remain on after turning off the control knob until the corresponding element has
cooled to a safe temperature.
Induction Ranges
Induction Cookware
Induction cooking utilizes magnetic power which reacts with iron in the base of cookware, instantly transforming the pot or pan into the heat
source. The heat stops when the cookware is removed. Your cookware should be induction compatible and MUST have a magnetic layer of steel
for your induction cooktop to operate properly. The cookware should have a fl at, heavy magnetic bottom and straight sides with a diameter of 5"
(13 cm) to 12" (31 cm) to accommodate the various sized elements. The induction cookware should be in good condition and free from excessive
dents on the bottom to provide maximum performance and convenience. Cookware that is NOT suitable for your induction cooktop includes
pottery, glass, aluminum, copper, bronze, and any type of cookware with a footed base.
Rear and Front Elements
Push in and turn the control knob counterclockwise to the desired setting. The element will adjust the power output to maintain the desired
heat setting. The left front burner has a "Boost" feature. A boost of power is provided for 10 minutes and is used for quickly boiling water when
the element is turned to HI. When fi nished boiling, turn the control knob to Med HI to maintain the boil or to a lower setting for steaming,
warming, and simmering sauces.
Note: Induction cooking uses high powered induction elements for faster cooking performance. Some noise may be noticed by the high
powered induction elements. This is normal.
Induction Surface Indicator Lights
The surface indicator lights are located at the front of the glass cooktop. The indicator lights
are used to indicate activation, hot surface, and warnings.
Indicator Light
Solid
The element is ON and sensing the proper cookware.
Fast continuous fl ash
1. Element is OFF - hot surface.
without a pause
2. Element is ON - cookware is not present or cookware is not
induction cookware. (See recommended cookware in "Before
Using Cooktop" section.)
Slow continuous fl ash
The element is ON - surface temperature is very hot. The power
level is regulated to a lower temperature setting as the internal
temperature inside the cooktop has increased due to extended
use.
CAUTION
Metallic objects such as knives, forks, spoons, and lids should
not be placed on the induction surface since they can get hot.
Reasaon
DO NOT heat empty cookware or let cookware boil dry. The
cookware can absorb an excessive amount of heat very
quickly, resulting in possible damge to the cookware and
ceramic glass.
10
REAR
REAR
HOT
FRONT
FRONT
CAUTION
Advertisement
Table of Contents
