2.8
Loading paper
Paper not available
Do not load the following paper into the Bypass Tray. Doing so may cause a paper jam or damage to the
machine.
-
Folded, torn or creased paper, or bundles of sheets of different sizes
How to load paper
1
Open the Bypass Tray.
% To load large-sized paper, pull out the Tray Extension.
% To load banner paper, install the optional Mount Kit
MK-730.
NOTICE
Exercise care not to touch the surface of the Paper Feed Roll-
er with your hands.
2
Load paper with the print side facing down, then align the Lat-
eral Guide to the paper.
% Insert paper into the tray until their edges are pressed
against the back.
NOTICE
Do not load an excessive number of sheets such that the top
of the stack is higher than the
If paper is curled, flatten it before loading it.
When you change the paper type or change to custom size
paper, proceed to step 3 to change the setting on this ma-
chine.
When you do not change the paper type or change to custom
size paper when adding paper, you can use the current setting without making any changes.
3
Change the paper type and paper size settings.
% When loading paper other than plain paper, change the paper type setting.
% When loading custom sized paper, change the paper type setting.
% For details, refer to the User's Guide CD/DVD.
bizhub C658/C558/C458/C368/C308/C258
,
mark.
2
2-47