Preparation Flow; Operation Flow; Checking The Cable Connection - Konica Minolta bizhub C558 Quick Manual

3

Preparation flow

The following describes a preparation flow to send a fax from a computer. For details, refer to the relevant
page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the telephone line and network cable. For details,
refer to page 3-44.
2
Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-45.
The network can be used with the default settings unless otherwise requested.
3
Installing the fax driver on your computer
% Install the printer driver on your computer. For details, refer to page 3-46.

Operation flow

The following describes a flow to send a fax. For details, refer to page 3-47.
1
Creating data
% Create data to be sent using application software.
2
Configuring the fax driver
% Select a fax driver, and change the setting if necessary.
3
Entering a destination to send data
% Enter a destination to send data.

Checking the cable connection

1
Check that a modular cable is connected to the LINE port of
this machine.
2
Check that a LAN cable is connected to the LAN port of this
machine and the green LED is on.
3-44
Fax function
bizhub C658/C558/C458/C368/C308/C258
3.3