Using Other Picture Modes - NEC MultiSync UN552V User Manual

Using Other Picture Modes

When the SpectraView Engine is off, the white point can be adjusted using familiar red, green and blue level controls. To turn
SpectraView Engine off, see
There are different picture modes available when the SpectraView Engine is off. These picture modes have also been configured
with settings for general use as described in the
To change picture modesN:
Press the PICTURE MODE button on the wireless remote control to cycle through the modes, or select the mode in the
[PICTURE] list in the OSD menu.
These picture modes are available based on the selected input:
• For [DVI], [DisplayPort1], [DisplayPort2], [OPTION*
➙ ➙
STANDARD sRGB
* 1 : This function depends on which Option Board is installed in the monitor.
2
* : This input is available when the optional Raspberry Pi Compute Module Interface Board and Raspberry Pi Compute Module are installed. See
• For [VGA (YPbPr)], [VIDEO], [MP]
➙
STANDARD CINEMA
Picture Mode Types
PICTURE MODE
HIGH BRIGHT Highest brightness setting.
STANDARD Standard setting.
sRGB The standard color space used for the Internet, Windows
Recommended setting for general color management.
CINEMA A setting that boosts dark tones; best suited for movies.
CUSTOM Custom setting.


NOTEN: Changing any of the settings of the [PICTURE] in the OSD menu will change the settings for the current input only.
page 47 for instructions.
"Picture Mode Types"
1 ], [VGA (RGB)], [HDMI1], [HDMI2], [COMPUTE MODULE*
➙ ➙
CINEMA CUSTOM1 CUSTOM2
➙ ➙
CUSTOM1 CUSTOM2
table below.
➙
HIGHBRIGHT
➙
HIGHBRIGHT
PURPOSE
®
operating systems and digital cameras.
English−53
2 ]
page 98.