Table of Contents
Advertisement
Operation
DMX Personalities
This setting allows you to choose a particular DMX personality.
1.
Go to the SETTING main level.
2.
Select PERSONALITY.
3.
Choose the desired personality (UNO, DOS, or STD.P).
•
See the
for each personality.
•
Make sure that the starting addresses on the various products do not
overlap due to the new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1.
Select a DMX personality as shown in
2.
Set the Running Mode:
a.
Go to RUN MODE main level.
b.
Select DMX 512.
•
Note: For information on the SLAVE option, see
3.
Set the starting address:
a.
Go to ADDRESS main level.
b.
Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Mode
UNO
DOS
STD.P
DMX Values
STD.P
Channel
Function
1
Dimmer
2
Fine Dimmer
3
Strobe
DOS
Channel
Function
1
Dimmer
2
Dimmer Fine
UNO
Channel
Function
1
Dimmer
Ovation FD-105WW User Manual Rev. 4
DMX Control
section for the highest starting address you can select
DMX
Personalities.
Value
Percent/Setting
000
255
0–100%
000
255
0–100%
000
009
Open
010
099
Strobe (slow to fast)
100
109
Open
110
179
Lightning effect (slow to fast)
180
189
Open
190
255
Random strobe (slow to fast)
Value
000
255
0-100%
000
255
0-100%
Value
000
255
0-100%
Master/Slave
Mode.
DMX Address
512
511
510
Percent/Setting
Percent/Setting
Page 11 of 18
Advertisement
Table of Contents
