Table of Contents
Advertisement
Chapter 2 - Set Up A New Thor VM2CG
This page lists a quick outline of the steps you might take when setting up a new Thor VM2CG. More instruction for each step
is listed later in this guide. Please refer to the Thor VM2CG Reference Guide for additional information and instruction.
Contact
Technical Assistance
Note:
Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work
surface, the Thor VM2CG, and components from electrostatic discharge.
Caution
Before shipping, the internal UPS battery must be disconnected.
Please refer to the Thor VM2CG Reference Guide for details.
Hardware Setup
1. Connect accessories to the
2.
Connect
cables.
3. Connect power cable to the dock.
4. Secure all cables to the dock with the Strain Relief Cable Clamps.
5. Secure the Thor VM2CG in the dock.
6. Press the power switch on the dock.
7. Press the Power key.
Software Setup
Hardware setup should be completed before starting software setup.
1.
Calibrate Touch screen
2.
Set Date and Time Zone
3. Set Power Schemes Timers
4.
Adjust Speaker Volume
5.
Pair Bluetooth devices
6. Setup Wireless client parameters
7. Setup
terminal emulation
8.
Save changed settings
9. Setup the AppLock parameters
10. Set the DC Wedge parameters
Please refer to the Thor VM2CG Reference Guide for additional information and instruction.
if you need additional help.
Quick Mount Smart
parameters
to the registry
Dock.
2-1
Advertisement
Table of Contents
